A proposed protocol for correlation between bone density in hemimandibular hyperplasia radiography and histopathological findings - A retrospective study.

The role of low-dose computed tomography (LDCT) in surgical planning can be assessed based on the correlation among bone density (BD/HU), radiographic values, and the histopathological appearance of hyperplastic overgrowth in mandibular condyles (hemimandibular hyperplasia/osteochondroma). The aim of this study was to evaluate the correlation between LDCT indices of bone-density measurements in surgical planning and histopathological specimens. The patients incuded in this study underwent detailed radiological evaluation as preparation for further clinical procedures. Excised condyles were evaluated in terms of bone density index using LDCT, and then histopathologically to investigate the accuracy of surgical procedures and set the basis for future surgical planning. An index value between both condyles' bone densities represented the relative difference between the healthy condyle and the side with hemimandibular hyperplasia (HH). Patients with unilateral condylar hyperplasia (UCH) showed a statistical correlation between condyle heads with increased bone density (BD) and scintigraphic (SCI) values (p < 0.001). On the other hand, correlation between BD and histopathological studies alone was significant (p < 0.001). With the increase in BD measured in HU in UCH condyles, the overall value of fibrous cartilage layer thickness decreased (p < 0.001). Furthermore, histopathological evaluation indicated that increased bone density on the UCH side resulted in increased total thickness (p > 0.001). The proposed index measurements in the mandibular condyles based on LDCT/BD can be used to estimate the degree of required surgical resection. Results from LDCT radiographic studies correlate with histopathological specimens more than scintigraphy.

The Role of Digital Surgical Planning and Surgical Guides in the Treatment of Unilateral Condylar Hyperplasia.

Unilateral condylar hyperplasia (UCH) results in facial asymmetry, malocclusion, and temporomandibular joint dysfunction. Treatment consists of both surgical and orthodontic intervention. A review was performed for 4 patients with UCH who underwent digital surgical planning (DSP)-assisted condylectomy. All patients were female, aged 14 to 35 years at the time of operation with facial asymmetry and class III malocclusion. None of the patients had prior treatment and all had perioperative orthodontic appliances to provide fixation and postoperative elastic therapy. All patients underwent DSP-guided condylectomy, and intraoperative surgical cutting guides were used for 3 of the patients. All had significant improvement in facial symmetry and occlusion. None had recurrence, and additional intervention has not been required. If UCH is recognized before marked secondary changes in the maxilla, mandible, and occlusion, future orthognathic surgery may be potentially obviated. Craniomaxillofacial surgeons should consider using DSP and surgical guides in the treatment of UCH.

Combining Patient-specific Implant With Malar Reduction to Repair Mid-facial Asymmetry Caused by Craniofacial Fractures in Asians.

Mid-facial asymmetry caused by bone defect or deformation resulted from craniofacial fracture was a common secondary complication needed to repair. Patient-specific implant (PSI) designed with the unaffected side as a template is a good choice to repair this kind of facial asymmetry. However, in Asians, the broad and prominent zygomatic bone in unaffected side is not an optimal template, because the oval facial shape was considered as a more attractive appearance in Asian esthetic concept. To repair the mid-facial asymmetry and to improve the facial contour, the authors combined PSI implantation with malar reduction in one-stage surgery. The authors referred the facial proportion index (the optimal ratio of mid and lower face was 1.27) as a basis for preoperative precise design to determine the ideal facial shape of unaffected side, and used mirror image overlay technique with the ideal shape of unaffected side as a template to design the PSI. With this surgical strategy, patients not only can repair facial asymmetry but also can get a more attractive appearance.

Intraoral volume changes in relation to the hard tissue shape changes in asymmetric patients before and after orthognathic surgery - A retrospective CT study.

OBJECTIVES: To evaluate Intraoral volume changes in relation to the hard tissue shape changes in asymmetric patients before and after orthognathic surgery and establish a correlation between them. MATERIALS AND METHODS: A retrospective study which evaluated 12 asymmetric patients' pre and post-surgical CT records satisfying the inclusion criteria. Borders were defined for the measurement of extraoral, intraoral and tongue volume. The volume assessment was carried out using software from 3D SYSTEMS, Colorado, US, Version 1.0.2.2055. RESULTS: Predicting changes in volume between extra-oral, intra-oral spaces and tongue, Linear regression modeling of the data revealed that for every mm3 change in post-surgical extra-oral volume the post-surgical intra-oral volume decreased by 0.684 mm3 and for every mm3 change in post-surgical intra-oral volume, the post-surgical tongue volume increased by 0.728 mm3. CONCLUSIONS: Significant decrease in the extra-oral volume, Intra-oral volume and tongue volume was evident after orthognathic surgery in patients with facial asymmetry. This volumetric approach sheds insight into achieving a muscular equilibrium between intraoral and extraoral structures, which would improve orofacial function and enhance facial aesthetics.

Complications in patients with facial bone fractures before and after conservative and surgical treatment, their comparison and correlation with different factors.

OBJECTIVE: This study aims to determine the occurrence of complications before and after the treatment of facial fractures, as well as the impact of the factors on the treatment results and evaluation of their relationships. PATIENTS AND METHODS: This is a prospective case-control study comprising 90 patients aged between 18 and 65 with facial fractures. Depending on the treatment method, patients were divided into three groups: those treated surgically using a transcutaneous approach, those treated surgically using a transmucosal approach, and those treated conservatively (control group). Following complications before and after treatment were compared: malocclusions, paresthesias, facial asymmetry, diplopia, and limited mouth opening. The follow-up period after the treatment of choice was six months. RESULTS: There was a significant reduction in complications after treatment: malocclusion, paresthesia, facial asymmetry, and limited mouth opening. Regarding the transcutaneous approach, there is a substantial reduction in the number of complications after treatment, such as malocclusions (p=0.008), paresthesias (p=0.004), and facial asymmetries (p<0.001). Similar results were obtained for the transmucosal approach. Pain intensity positively correlated with preoperative complications: malocclusion, paresthesias, and facial asymmetry. The range of mouth opening had a negative interdependence with malocclusion before and after treatment with infection, fractura male sanata, malocclusion, paresthesias, postoperative level of mouth opening, and damage to the facial nerve. CONCLUSIONS: There is no difference in the reduction of preoperative and postoperative complications related to surgery when an incision is made through the skin or mucosa. Malocclusions, paresthesias, and facial asymmetry are reduced through surgical methods.

Anatomical Conditions in Simultaneous Orthognathic Surgery and Structural Rhinoplasty. A Clinical Series / Condiciones Anatómicas en Cirugía Ortognática y Rinoplastia Estructural Simultanea. Una Seria Clínica

SUMMARY: Orthognathic surgery and rhinoplasty show synergy in terms of function and aesthetic results. The aim of this research is to analyze variables related to simultaneous orthognathic surgery and rhinoplasty and to discuss the surgical sequence. Male and female subjects between 18 and 45 years old were included in this research. Diagnosis related to nasal morphology (nasal tip bifid, rotate, square and others as well as the alae morphology and columella), facial deformity (sagittal and vertical deformity), type of surgery (rhinoplasty techniques and orthognathic techniques) and complications were included. The minimum follow-up was 12 months; Chi- Square and t test were used to define correlations, considering a value of p<0.05 for statistical significance. Class III facial deformity was observed in 40 % of subjects and class II facial deformity was present in 43 %. For the nasal deformities, the tip and nasal bridge were most prevalent; primary nasal deformity was observed in the 83 % of subjects and was significant more than secondary nasal deformity (p=0.042). Bimaxillary surgery was performed in 31 cases (88 %). In 10 cases a change of the original plan for rhinoplasty due to previous maxillary surgery was realized, mainly in class III facial deformity, with no statistical differences. Revision rhinoplasty was realized in 5 cases (14 %) and was not related to surgical variables; revision for orthognathic surgery was not necessary in this series. Rhinoplasty and orthognathic surgery simultaneously show low complications and predictable results. We can conclude that maxillary mandibular osteotomies and rhinoplasty could be performed safely. However, larger studies are necessary to understand the best choice and variables involved in simultaneous procedures and soft tissue response.

La cirugía ortognática y la rinoplastia muestran sinergia en términos de resultados funcionales y estéticos. EL objetivo de esta investigación es analizar variables relacionadas con la cirugía ortognática y rinoplastia ejecutada de forma simultanea. Fueron incluidos hombres y mujeres entre 18 y 45 años de edad. EL diagnóstico fue en base a la morfología nasal (punta bífida, rotada, cuadrada u otras así como alteraciones del ala nasal y columela), deformidad facial (deformidad sagital y vertical), tipo de cirugía (técnica de rinoplastia y cirugía ortognática) y complicaciones asociadas. El seguimiento mínimo fue de 12 meses; se utilizo las prueba t test y chi cuadrado para definir relaciones estadísticas considerando un valor de p< 0,05 para obtener diferencias significativas. La deformidad clase III fue observada en el 40 % de los sujetos y la deformidad facial de clase II se presento en el 43 %. Para la deformidad nasal, las alteraciones de a punta nasal y nasal fueron mas prevalentes; la deformidad nasal primaria se presentó en el 83 % de los sujetos y fue significativamente mayor que la deformidad nasal secundaria (p=0,042). La cirugía bimaxilar se realizó en 31 casos (88 %); en 10 casos se realizó el cambio del plan quirúrgico inicial de la rinoplastia debido a cambios generados en la cirugía maxilar previa, mayormente en deformidad facial de clase III, sin presentar diferencias significativas. La rinoplastia de revisión fue realizada en 5 casos (14 %) y no fue relacionada con ninguna variable de tipo quirúrgica; la revisión de cirugía ortognática no fue realizada en ningún caso de esta serie. La rinoplastia y la cirugía ortognática simultanea mostraron bajas complicaciones y resultados predecibles. Se puede concluir que la osteotomía maxilo mandibular y la rinoplastia son seguras; sin embargo, estudios de mayor volumen son necesarios para entender la mejor opción y variables relacionadas con procedimientos simultáneos y la respuesta de tejidos blandos faciales.

Three-dimensional evaluation of symmetry in facial palsy reanimation using stereophotogrammetric devices: A series of 15 cases.

Facial palsy can severely compromise quality of life, significantly altering the harmony and symmetry of the face, which can be restored by surgical rehabilitation. The aim of the study was the quantification of facial symmetry following facial reanimation. Fifteen consecutive adult patients were surgically treated through triple innervation for reanimation of flaccid unilateral facial paralysis (contralateral facial nerve, masseteric nerve, and hypoglossal nerve) and fascia lata graft for definition of the nasolabial sulcus. In the preoperative stage and at least 11 months after the surgical treatment, three-dimensional facial images were recorded through stereophotogrammetry in a neutral (rest) position, and with Mona Lisa and full-denture (maximum) smiles. Labial commissure inclination relative to the interpupillary axis, and a surface assessment of local facial asymmetry at rest and while smiling were obtained for the upper, middle, and lower facial thirds. The angle between the interpupillary axis and the labial commissure significantly improved in post-surgical acquisitions, regaining symmetry at rest (t-test; p < 0.001). Facial symmetry increased significantly when passing from pre-to postsurgical facial scans, from the lower to the upper facial third, and from the full smile to the rest position (ANOVA; p < 0.001). After treatment, the full smile recovered more symmetry than the other two expressions. In summary, surgical treatment significantly reduced facial asymmetry, but this reduction differed significantly among the various animations and facial thirds. The results of this study confirmed clinical findings of significant static and dynamic improvements in facial symmetry after triple innervation reanimation surgery.

[Model test study on treatment of Pruzansky type â ¡B and â ¢ hemifacial microsomia with artificial condyle-mandibular distractor complex].

Objective: To preliminarily verify the effectiveness of self-designed artificial condyle-mandibular distraction (AC-MD) complex in the treatment of Pruzansky type ⅡB and Ⅲ hemifacial microsomia (HFM) through model test. Methods: Five children with Pruzansky type ⅡB and Ⅲ HFM who were treated with mandibular distraction osteogenesis (MDO) between December 2016 and December 2021 were selected as the subjects. There were 3 boys and 2 girls wih an average age of 8.4 years (range, 6-10 years). Virtual surgery and model test of AC-MD complex were performed according to preoperative skull CT of children. The model was obtained by three-dimensional (3D) printing according to the children's CT data at a ratio of 1∶1. The occlusal guide plate was designed and 3D printed according to the children's toothpaste model. The results of the model test and the virtual surgery were matched in three dimensions to calculate the error of the residual condyle on the affected side, and the model test was matched with the actual skull CT after MDO to measure and compare the inclination rotation of the mandible, the distance between the condylar of the healthy side and the residual condyle of the affected side, and the lengthening length of the mandible. Results: The error of residual condyle was (1.07±0.78) mm. The inclination rotation of the mandible, the distance between the condylar of the healthy side and the residual condyle of the affected side, and the lengthening length of the mandible after 3D printing model test were significantly larger than those after MDO ( P<0.05). Conclusion: In the model test, the implantation of AC-MD complex can immediately rotate the mandible to the horizontal position and improve facial symmetry, and the residual condyle segment can be guided close to the articular fossa or the preset pseudoarticular position of the skull base after operation.

Risk factors for postoperative infection after bilateral sagittal split ramus osteotomy: A retrospective analysis.

BACKGROUND: This retrospective clinical study investigated risk factors for infection following bilateral sagittal split ramus osteotomy (BSSO) as orthognathic surgery, including the patients' general condition, local factors, and surgical factors. PATIENTS AND METHODS: The cases of 160 mandibular sites of 80 Japanese patients (26 males, 54 females; mean ± SD age: 25.3 ± 7.7 years, range 16-55 yrs) with a jaw deformity who underwent BSSO orthognathic surgery at our Department of Oral and Maxillofacial Surgery between Jan. 2017 and Dec. 2022 were analyzed. Potential risk factors were classified as clinical predictive variables. Descriptive and univariate statistics were computed. A multivariate analysis was performed with logistic regression. RESULTS: Fifteen mandibular sites (9.4 %) were complicated with postoperative infection. The multivariate analysis revealed significant differences in facial asymmetry (OR 24.0, p = 0.0002) and the amount of mandibular movement (OR 0.664, p = 0.011) between the sites with and without infection. CONCLUSIONS: Among clinical variables, facial asymmetry was the strongest risk factor for post-BSSO infection, followed by the amount of mandibular movement.

An innovative analysis of nasolabial dynamics of surgically managed adult patients with unilateral cleft lip and palate using 3D facial motion capture.

AIM: To compare dynamic nasolabial movement between end-of-treatment cleft and a matched non-cleft group in adult patients. MATERIALS AND METHODS: Thirteen treated adult participants with unilateral cleft lip and palate had images taken using a facial motion capture system performing a maximum smile. Seventeen landmarks were automatically tracked. For each landmark pair, on either side of the midline, changes in the x, y, and z directions were used to analyze the magnitude of displacement and path of motion. An asymmetry score was developed at rest, mid-smile, and maximum smile to assess the shape of the mouth and/or nose. RESULTS: At maximum smile, displacement of right and left cheilion was clinically and statistically (p < 0.05) less in the cleft group. The lip asymmetry score was greater (p < 0.05) at each time point in the cleft group using the clinical midline. Using Procrustes superimposition, the differences were significant (p < 0.05) only at rest and mid-smile. The alar bases were displaced significantly less (p < 0.05) in the z direction in the cleft group. The asymmetry score of the alar base was significantly higher using the clinical midline than using Procrustes superimposition in patients with cleft conditions (p < 0.001). In the cleft group, at maximum smile, the right and left cristae philter moved significantly less (p < 0.05) in the x and z directions. CONCLUSIONS: There was an increase in asymmetry score of the corners of the mouth and alar bases from rest to maximum smile. The lips were similar in shape but oriented differently in the faces of patients with cleft conditions than in individuals without those conditions.

Single photon emission computed tomography (SPECT) diagnostic accuracy in active unilateral condylar hyperplasia: Retrospective study.

The aim of this study was to assess the diagnostic accuracy of single photon emission tomography (SPECT) in unilateral condylar hyperplasia (UCH). To this end, 3D morphometric changes of the mandibles in one year were assessed (T0 vs. T1) and compared over SPECT results in T1, in a sample of 40 patients. A contingency table was constructed based on these results for SPECT diagnostic accuracy evaluation, classifying patients as SPECT true-positive, true-negatives, false positives and false-negatives. Additionally, the morphometric analysis was used to describe the presentation of mandibular changes using principal component analysis (PCA) and non-parametric statistics. We obtained diagnostic accuracy results of sensitivity 81%, specificity 63%, positive predictor value (PPV) 59%, negative predictor value (NPV) 83% and accuracy 70%, showing that SPECT yields poor results regarding accuracy diagnostic performance. The morphometric analysis showed that individuals without progress of asymmetry and those with more progress differ particularly in a group of landmarks representing the mental region and the right mandibular body. Based on these landmarks, difference among the four SPECT-accuracy groups was statistically significant (p < 0.001), where the landmark showing the largest change within a year had a mean increase of 1.13 + 0.66 mm. Within the limitations of the study, it seems that SPECT alone is not suitable for making surgical decisions regarding condylectomy in active UCH. Follow up with morphological assessment methods are recommended for confirming an active UCH in combination with SPECT.

Changes in Facial Symmetry Following Computer-Assisted Secondary Correction of Craniofacial Fractures.

OBJECTIVE: For patients without dysfunctions, the main purpose of secondary correction for craniofacial fractures is restoring facial symmetry. Computer-assisted surgery techniques including virtual surgical planning and intraoperative navigation provide the help to restore the bony symmetry as much as possible. The authors retrospectively quantitatively analyzed patients who received computer-assisted secondary correction for craniofacial fractures on facial symmetry pre and postoperation. METHODS: This observational study reviewed the medical records of 17 patients requiring secondary correction for craniofacial fractures. Pre and postoperative computed tomography data were used to quantitatively analyze the changes in facial symmetry and enophthalmos. RESULT: All patients enrolled in this study showed mid-facial asymmetry but without dysfunctions except for enophthalmos, and 5 patients had bone defects in the frontal-temporal area. The corrective surgical techniques were different for each patient according to their specific condition. Virtual surgical planning with or without intraoperative navigation was performed for all patients. Compared with the preoperative condition, their facial symmetry was significantly improved. The maximum discrepancy value between the affected side and the mirrored unaffected side decreased from 8.10 ± 2.69 to 3.74 ± 2.02 mm postoperatively, and the mean discrepancy value decreased from 3.58 ± 1.29 to 1.57 ± 0.68 mm. In addition, the Enophthalmos Index decreased from 2.65 to 0.35 mm. CONCLUSION: This observational study objectively demonstrated that computer-assisted secondary correction for craniofacial fractures can significantly improve facial symmetry. And the authors recommend that virtual surgical planning and intraoperative navigation should be a must step in craniofacial fracture correction.

Himi-Lengthening Genioplasty: A Modified Technique for the Correction of Mandibular Asymmetry.

Mandibular asymmetry is among the most common facial anomalies. Traditionally, mandibular asymmetry with malocclusion has been treated with orthognathic surgery and genioplasty. However, routine genioplasty cannot achieve a satisfactory contour. Hence, this study presents a modified technique, himi-lengthening genioplasty, to resolve this matter. By combining this technique with orthognathic surgery, the authors successfully corrected mandibular asymmetry in 1-stage surgery, achieved ideal occlusion, and reconstructed the esthetic contour. No complications occurred during the 6-month follow-up period. Therefore, the authors recommend our modified surgical technique for its effectiveness, security, stability, and simplicity.

Application of Surgery-First Approach in Treating Skeletal Dentofacial Asymmetry with Orthognathic Surgery.

BACKGROUND: Skeletal dentofacial asymmetry decreases patient's attractiveness by deteriorating symmetry of facial appearance which is of great significance to individuals. Surgery-first orthognathic approach manifests its advantages of shortening treatment time and improving patient's quality of life. However, current literature on surgery-first approach mainly focuses on treating prognathism, overlooking its efficacy in improving facial symmetry of skeletal dentofacial asymmetry patients. This study aimed to assess SFA's efficacy in improving facial appearance by analyzing morphological features of asymmetric bone and facial soft tissue in a three-dimensional manner. METHODS: Thirty-four patients who received orthognathic surgery in a surgery-first fashion were included. Based on three-dimensional CT reconstruction, bilateral preoperative morphological features and postoperative symmetry of hard tissue were compared respectively. Efficacy of facial soft tissue symmetry restoration was evaluated using root mean square deviation (RMSD). RESULTS: Asymmetric features mainly located in menton, mandibular body length, angulation between ramus and midsagittal plane (MSP), distance between gonion and MSP and so on, which were significantly restored after the whole treatment. RMSD of facial soft tissue surface were significantly declined after the treatment and prognathism was corrected simultaneously if existed. CONCLUSIONS: Surgery-first orthognathic approach is proved to be capable of treating skeletal dentofacial asymmetry effectively and efficiently.

The learning curve of transoral condylectomy; a retrospective analysis of 100 consecutive cases of unilateral condylar hyperplasia.

In this study, 100 consecutive scheduled transoral condylectomies for unilateral condylar hyperplasia were included. The safety and surgical performances were assessed, using the operating time, conversion rate and complication rate. The conversion rate learning curve was evaluated with a learning curve cumulative summation (LC-CUSUM). The total conversion rate was 8.0%. The LC-CUSUM for conversion signaled at the 53th procedure, indicating sufficient evidence had accumulated that the surgeon had achieved competence. For procedures 54-100, the conversion rate was 4.0%. The operating time for the transoral condylectomy was 41.5 ± 15.3 min; when a conversion was necessary, the operating time was 101.4 ± 28.3 min (p < 0.05). The estimated operating time in the post-learning phase was 37 min, this was reached after approximately 47 procedures. There was 1 major complication of a permanent inferior alveolar nerve hypoesthesia. The complication rate was not significantly decreased after the learning curve. Within the limitations of the study, it seems that transoral condylectomy for UCH is a safe procedure with several advantages over the traditional preauricular approach. Surgeons starting this procedure should be aware of the potential complications and of the learning curve of approximately 53 procedures.

Surgical Stability After Proximal Segment Angle Alteration in Patients With Class III Facial Asymmetry.

PURPOSE: Patients with facial asymmetry often seek improved symmetry in lower face contour resulting in transverse movement of the proximal segments. The study aimed to investigate the association between transverse change in the proximal segments and postoperative relapse after the surgical correction of skeletal Class III facial asymmetry. METHODS: This retrospective cohort study includes consecutive patients with skeletal Class III asymmetry who underwent 2-jaw orthognathic surgery. The primary predictor variable was ramus plane angle (RPA). The patients were grouped as small (S group, <4°) and large (L group, ≥4°) changes in RPA. The primary outcome was the positional change of B point, menton, and the intergonial width. Cone-beam computed tomography images were obtained before surgery (T0), 1 week after surgery (T1), and debond (T2). Intergroup comparison was conducted with independent t test. Correlations between the variables were estimated by Pearson correlation. RESULTS: The study sample was composed of 60 subjects with 30 subjects in each study group. In the S group, the mean surgical changes of RPA were inward rotated 0.91° bilaterally. In the L group, the mean surgical changes of RPA were inward rotated 4.80° and 0.32° on the deviated and non-deviated side. After surgery, further minor inward adaptation of both sides was noted (<1 mm), and intergonial distance reduced with these changes in the proximal segments. By comparing the postsurgical stability between S and L group, the overall sagittal and vertical stability had no significant difference between 2 groups. However, the postsurgical transverse menton relapse (ΔMe in T2-T1) was significantly larger in L group (0.81 ± 1.40 mm) than S group (0.04 ± 1.32 mm) by 0.77 mm (P = .014). CONCLUSION: Greater surgical changes in the proximal segments had minor clinical effect on transverse stability. Minor transverse overcorrection of 1 mm is recommended in cases with severe facial symmetry with extensive changes in the proximal segments.

The Accuracy and Stability of Intentional Change of Frontal-Ramal Inclination in Orthognathic Surgery for Facial Asymmetry Patients.

Facial asymmetry can be defined as differences in the left and right sides of the face, and most of the patients with facial asymmetry have different left and right frontal-ramal inclinations (FRIs). Restoring the symmetry of both FRIs is important in the surgery of facial asymmetry patients, but it is very difficult to achieve perfect symmetry through conventional orthognathic surgery. However, by using 3-dimensional (3D) virtual planning and CAD/CAM technolo gies, intentional change of FRIs can be possible so the symmetry can be improved. The purpose of this study is to evaluate the surgical accuracy and long-term stability of intentional change of FRIs by 3D virtual surgery, CAD/CAM-assisted orthognathic surgery for patients with facial asymmetry. The study included 20 patients who had undergone orthognathic surgery for skeletal class III malocclusion from January 2019 to December 2021. To evaluate the accuracy of surgery, 3D facial cone beam computed tomography (CBCT) taken immediately after surgery (T1) and virtual surgery data (Tv) were measured and the difference values were calculated. The evaluation of the long-term stability of intentional change of FRI was performed by measuring T1 and T2 (3D facial cone beam computed tomography images taken 6 mo after surgery) and the difference values were calculated. The difference values of FRIs in the left and right proximal segments of each patient were calculated. And then, for comparison depending on the direction of rotation, increased FRI groups (n=20, medial rotation) and decreased FRI groups (n=20, lateral rotation) were analyzed separately. As a result, all difference values at both (ΔT1-Tv) and (ΔT2-T1) were <1 degree. As a result of analyzing the entire FRI by dividing it into decreasing and increasing groups, the mean value of (ΔT1-Tv) was 0.225 degrees for the decreasing group and 0.275 degrees for the increasing group. It means that the proximal segment moved less than the movement implemented by the virtual surgery through actual surgery but it shows a very small error, which means that the overall operation almost accurately implements the virtual surgical planning. Compared with (ΔT1-Tv), the mean value of (ΔT2-T1) showed a much smaller error value, and no specific tendency was observed. This indicates that the stability after surgery is very good. Based on this study, using 3D virtual surgery planning and CAD/CAM technologies for treating patients with facial asymmetry was very useful, and surgery could be performed accurately and predictably. In particular, left-right symmetry was almost perfectly achieved through virtual simulation and could be implemented through actual surgery. Therefore, it can be said that the use of these 3D technologies is recommended for the surgical approach of facial asymmetry.

Can Condylectomy Alone Achieve Facial Symmetry in Patients With Hemimandibular Hyperplasia (Condylar Hyperplasia Type 2)?

The purpose of the present study was to evaluate the 3-dimensional orofacial changes occurring after proportional condylectomy in patients with unilateral condylar hyperplasia type 2 (hemimandibular hyperplasia). Eight patients underwent proportional condylectomy that was not followed by orthognathic surgery or orthodontic treatment for at least 1 year. The precondylectomy and postcondylectomy photographs and radiographs were analyzed cephalometrically and compared. The average length of the condylar segment removed was 13 mm and this resulted in almost equal heights of the ramus-condyle units of both sides. Evaluations in the vertical plane improved after surgery; however, when the preoperative asymmetry was significant, the residual asymmetry continued to be notable after condylectomy. Transverse plane evaluations improved after condylectomy, and chin position was satisfactorily centralized in all patients. In the horizontal plane, mandibular setback occurred, and this was considered favorable when the preoperative skeletal profile was class III, whereas the opposite was when the patient was class I before surgery. The occlusion improved gradually over the postoperative months by the intrusion on the affected side and extrusion on the unaffected side into a bilaterally balanced posterior contacts with residual anterior open bite. In conclusion, condylar hyperplasia type 2 patients with mild asymmetry and low esthetic demands can benefit from proportional condylectomy as the sole treatment to both stop the hyperplastic condylar growth and improve the asymmetry to some extent. Surgeons should be able to predict the change that is expected to occur after proportional condylectomy and discuss this with the patient before surgery.

Facial Asymmetry Phenotypes in Adult Patients With Unilateral Cleft Lip and Palate and Skeletal Class III Malocclusion Using Principal Component Analysis and Cluster Analysis.

The purpose of this study was to classify and characterize facial asymmetry (FA) phenotypes in adult patients with unilateral cleft lip and palate (UCLP) and skeletal class III malocclusion. The samples comprised 52 adult UCLP patients (36 men and 16 women; mean age, 22.43 y) who had undergone orthognathic surgery for correction of class III malocclusion. After measurement of 22 cephalometric parameters in posteroanterior cephalograms taken 1 month before orthognathic surgery, principal component analysis was performed to obtain 5 representative parameters [deviation (mm) of ANS (ANS-dev), maxillary central incisor contact point (Mx1-dev), and menton (Me-dev); cant (degree) of the maxillary anterior occlusal plane (MxAntOP-cant) and mandibular border (MnBorder-cant)]. K-means cluster analysis was conducted using these representative parameters. The differences in cephalometric parameters among the clusters were statistically analyzed. The FA phenotypes were classified into 4 types: No-cant-and-No-deviation type (cluster-4, n=16, 30.8%); MxMn-cant-MxMn-dev to the cleft-side type (cluster-3, n=4, 7.7%); Mx-cant-Mn-shift to the cleft-side type (cluster-2, n=15, 28.8%); and Mn-cant-Mn-dev to the noncleft-side type (cluster-1, n=17, 32.7%). Asymmetry in the maxilla and/or mandible were observed in 70% of patients. One third of patients (cluster-2 and cluster-3; sum, 36.5%) exhibited significant cant of MxAntOP induced by cleft and cant or shift of the mandible to the cleft side. Another one third of patients (cluster-1, 32.7%) demonstrated significant deviation and cant of the mandible to the noncleft-side despite cleft in the maxilla. This FA phenotype classification might be a basic guideline for diagnosis and treatment planning for UCLP patients.